Product Recommendations
Related Products
Featured Products
Product Information
Gamdias APOLLO E2 Mid Tower Gaming Casing
| Gamdias APOLLO E2 Gaming Case -Specification |
| Interface | Type : Mid Tower Front Panel : USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1 Tempered Glass Panel : Front. Left (SPCC & ABS & Tempered glass) Motherboard Support mini-ITX, microATX, ATX Color(s) Black Weight : 5.5 kg Dimensions : 370 x 216 x 462 mm Front Ports : USB 3.0 x1, USB 2.0 x2, HD Audio x1, Expansion Slots : 7 I/O Port USB 3.0 x1 , USB 2.0 x2 , HD Audio x1, Fan LED control x1 PSU : PSU length limitation: 150mm Side Panel : SPCC & ABS & Tempered glass |
| Radiator Support | Top: 240 mm Front:360 mm, 280 mm Rear:120 mm |
| Fan Support | Top: 2 x 120mm , 2 x 140mm Front: 3 x 120mm , 2 x 140mm , 2 x 200mm Rear: 1 x 120mm, 1 x 140mm Bottom: 2 x 120mm |
| Pre-installed Fans | Front: 2 x 200mm ARGB Fans Rear: 1 x 120mm Fan |
| Drive Bays | 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) 3 x 2.5" |
| Clearance | Maximum Processor Height CPU cooler height limitation: 170mm Maximum Graphics Card Length VGA length limitation: 300mm |
Gamdias APOLLO E2 Gaming Case
Dual built-in 200mm ARGB LED fans in the front panel not only bring a sensational visual feast but also generate high airflow through the case. Astonish in the cool world that APOLLO E2 has made. A cleanly designed side glass panel without the thumb screws getting in the way visually. A unique designed mechanism which allows the side glass panel to slide and clip right into the case. Therefore you are able to function the 4mm tinted tempered glass with ease, which displays your internal rig components. Handy I/O port on the top of the case featuring an ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, an HD audio jack, and a power button can also be found on the I/O port. A magnetically held dust filter, located on top of the APOLLO E2 to minimize dust entering the case. The magnets holding the dust filter in place makes it easy to remove and clean the washable dust filter. The accommodation inside APOLLO E2 is able to support up to eight 120mm fans. Mounting points for a 280mm, 240mm radiator at the top and front, 120 mm radiator in the rear.
